Unifiber Essentials SDM 50% Constant curve FL mast

Unifiber Essentials SDM Constant curve FL mast

De Unifiber Essentials SDM Constant curve FL mast constant curve 50% carbon  mast is 2-delig en werkt perfect op diverse surf zeil merken waaronder;

- Challenger Sails
- Duotone
- Gaastra
- Point 7
- Simmer Style
- XO Sails

Heb je nog vragen over de juiste keus van je mast bel ons dan even 073-5212787

	Constant FL Curve	Carbon Fiber	Finishing	Base %	Top %	Stiffness IMCS	Weight +/- 6%
	Essentials SDM C50 Constant FL Curve 400	T700	Matte Black Spiral Taped	62 %	77 %	19	2.18 kg
	Essentials SDM C50 Constant FL Curve 430	T700	Matte Black Spiral Taped	62 %	77 %	21	2.33 kg
	Essentials SDM C50 Constant FL Curve 460	T700	Matte Black Spiral Taped	62 %	77 %	25	2.62 kg
	Essentials SDM C50 Constant FL Curve 490	T700	Matte Black Spiral Taped	62 %	77 %	29	2.91 kg

The bend characteristics of a mast is defined by four variables:

• IMCS: this represents the average stiffness of the mast

• Base%: this defines the deflection at the base (relative to the midpoint)

• Top%: this defines the deflection at the top (relative to the midpoint)

• Bend Curve Number: this number - in an approximate way - describes the mast curve. It is calculated by subtracting the Base% from Top%.

• Constant Curve- This is the most commonly used curve profile
  
  
  • Base%: 62,5%
  
  
  • Top%: 76%
  
  
  • BC number: 13,5
  
  
  

• Constant FL Curve- This is similar to the old "flex top" mast, but with more flex low down (around the centre) of the mast. FL = Flex Low.
  
  
  • Base%: 62%
  
  
  • Top%: 77%
  
  
  • BC number: 15
  
  
  

• Constant FH Curve- This is also similar to the old "flex top" mast, but there is more flex high up. The centre section is relatively stiff. FH = Flex High.
  
  
  • Base%: 64% for RDM, 63% for SDM
  
  
  • Top%: 79% for RDM, 78% for SDM
  
  
  • BC number: 15